50,314 views
Before adaptation, the engine temperature should be 70-95 degrees. Remove all load from the engine (turn off all heating, lights, etc.). It is more convenient to do this with a stopwatch. Training procedure: 1. Turn off the ignition for 10 seconds. 2. Then turn on the ignition for 3 seconds. 3. Then press the gas pedal 5 times within 5 seconds. 4. After 7 seconds, press the gas pedal all the way and hold it until the yellow CHECK light starts blinking and lights up constantly. 5. After 3 seconds, after the light lights up constantly, release the gas pedal. 6. Start the engine (if it stalls, repeat the start) and wait 20 seconds. 7. Then rev the engine 2-3 times. To see the result, you need to put a load on the engine (turn on drive or reverse).