639,048 views
Now yes! To regulate changes without suffering! At last! Of course, first we have to understand a couple of previous concepts, that's why the video starts by telling you what the LOW and HIGH STOPS do and what the REGULATOR does. Once we understand that the L and H stops form a SEGMENT in which the derailleur leg is going to move taking the chain from the small sprocket to the largest sprocket, we will see what the famous REGULATOR is in charge of: giving tension to the derailleur cable, therefore regulating how well the chain goes up or down when moving from one sprocket to the next. Once this is understood, Tincho takes you to a bike and shows you THREE VERY COMMON CASES: 1) The chain does not go up or down the sprocket correctly and keeps rattling for a while. 2) The front derailleur scrapes against the chain. 3) The front derailleur does not go up or down the chainrings correctly. With this guide, you will stop touching the L and H screws almost permanently. You will focus more on the regulators, which are ultimately the most important parts of the regulation, since they are in charge of giving or removing TENSION TO THE CABLE, and as Tincho tells us in this video: THE CABLE IS THE ONE THAT MATTERS THE MOST in the regulation of changes. If you liked the content of this video, give it your LIKE and very important SUBSCRIBE, so you give back to Tincho for his effort in these contents. Follow us on social networks as BICI URBANA. We have a store in BELGRANO, on Sucre Street 2357 and another in PALERMO on Av. Córdoba 4772. Visit our website BICIURBANA.COM.AR We ship all over the country. Greetings people! And... If you go by bike, you go better! _________________________________________________________________ FOLLOW US ON SOCIAL MEDIA Instagram: @Bici_Urbana Facebook: / biciurbana Website: https://biciurbana.com.ar/ ________________________________________________________________ Video chapters: 00:00 Start 00:10 Introduction 01:34 Low and High, what do they do? 03:49 Regulator, what is it for? 05:08 What does each piece do? 10:42 Adjusting the rear derailleur 16:30 Adjusting the L and H stops 19:25 Adjusting the regulator 20:58 Summary and Closing