1,077,564 views
Hello friends and welcome to my new video. In this beautiful garden we have built a terrace and paths from quarry stone slabs (quartzite) and mowing edges from natural stone paving. We then planted the new beds with insect-friendly shrubs and trees. I hope you like the video. As always, I look forward to your opinions and comments! Take a look at https://www.heta-naturstein.de/, where you can find other beautiful stones (paving stones, stepping stones, wall stones, etc.) in addition to the natural stones used here. I would also be delighted if you visited my website. There you will also find an article specifically on the topic of terrace design :) https://florians-gartenwelt.de/terras... Below you will find recommended tools for such a project: Trowel: http://tidd.ly/ef10f3a7 Jointing trowel: http://tidd.ly/3b22c9d6 Rubber hammer: http://tidd.ly/11845cbd Sledgehammer: http://tidd.ly/1f9fa8fb Paving hammer: http://tidd.ly/7c74db6e Mason's line: http://tidd.ly/ccdd701f Line iron: http://tidd.ly/440c34b Angle grinder: http://tidd.ly/ab3ead07 Stirring paddle: http://tidd.ly/1a2fc129 Spade: http://tidd.ly/25d1778d Spirit level 100 cm: http://tidd.ly/bdcf3243 300 cm leveling and straightedge: http://tidd.ly/f4d6106e Tape measure: http://tidd.ly/c3ce1af1 We used the following materials: Gravel base layer: 20 cm thick from 0-45 mm gravel Leveling layer: 10 cm thick from 2-8 mm drain concrete Slab adhesive: Trass cement mixed with water Natural stone slab: Quartzite Karystos Blue, 2-3 cm from HETA-Naturstein https://www.heta-naturstein.de/produk... Small stone paving: Antique Anthracite, 10x10, 4-6 cm thick from HETA-Naturstein https://www.heta-naturstein.de/produk... Joint: Joint mortar 800 XL, 2-component reaction plastic mortar based on epoxy resin. Colors: stone gray, from Feiter