The main purpose of this tent is a comfortable stay in nature for a small company. Its dimensions allow a group of 4-6 people to stay inside with all the amenities. Thanks to the quick-assembly frame Rapidex Quick Erect System, the tent can be set up in just one minute. The tent can be used both on short trips (2-3 days) and on long hikes and rafting trips. It can be used as a wardroom or simply as a large tent in the summer. To do this, you will need to purchase an additional option - a floor. The difference between the FORTUNA 300 PREMIUM model and the FORTUNA 300 is that its frame is made of aluminum, and the regular Fortuna is made of fiberglass. In the dome of the tent, there are two ventilation holes protected by mosquito nets for improved ventilation. Above the ventilation holes is a protective apron that prevents water from getting through these holes during rain. The configuration of the tent at the base is a square with a side of 3 meters. The "legs" of the tent are connected to each other on the ground with straps. This model has two large entrances on opposite sides and a large window on the side walls. Moreover, the size of these windows is almost equal to the size of the side wall. The tent entrances and windows on the walls are equipped with a mosquito net and are duplicated with wind/waterproof walls. The tent comes with two steel posts. So, if desired, you can put one of the entrance walls as a canopy. There is a windproof skirt along the bottom of the tent. As an option, you can purchase an additional floor made of reinforced polyethylene for this model. You can also purchase another option for this tent model - Tenthouse. This is a large extension to the tent, in which the inner tent is suspended. Determine the part of the extension that will be thrown over the roof of your tent. It has guy ropes with plastic latches at the corners. Place the awning over the roof of the tent and secure these fasteners to the main arcs of the frame under the quick-assembly mechanism of the arcs. Secure the awning to the tent frame at the four upper corners using Velcro. Move to the opposite side. Take the fiberglass arc, assemble it and insert it into the upper sleeve of the tent house. Insert the ends of the arc into the plastic connectors that are sewn along the edges of the sleeve. Assemble steel poles, consisting of three sections each. Insert the upper end of each pole into the free hole of the plastic connector and fix the lower ends of the poles. Fasten the awning to the vertical steel poles using plastic latches. Unpin the tent house using steel pins and install the guy wires. After you have installed the awning itself, hang the inner tent and unpin its bottom into the ground. The inner tent has two entrances - one is oriented to the exit from the tent house to the outside, from the second you get directly inside the tent. On the side walls of the inner tent there are two large windows. Both the entrances and the windows of the inner tent are equipped with mosquito nets and windproof curtains. On the side walls of the outer tent there are two windows in the entire wall, which also have mosquito nets and wind/waterproof walls. The dimensions of the inner tent allow you to place four adults in it. The official warranty on the frame is 2 years, regardless of the warranty case. You can find additional information about the Maverick Fortuna 300 Premium and the extension on the official website of the manufacturer: http://www.mavericktent.ru To get acquainted with the reviews, reports and reviews of the owners, then here: http://www.rusfishing.ru/forum/forumd...