51,270 views
▪︎What are the square black films in the kit for? 27:40 - the reverse side of the heater unit is visible, and the places where the lamps were inserted are visible, now after checking these places need to be sealed with film. and then blow with a hair dryer if you have one, so that the film is drawn in. ▪︎ Is the resistor in the kit and what is it for? 15:50 - if there is a resistor in the kit, then we solder out the one that is installed stock on the board and solder the resistor from the kit instead. 7:01 - Installing the board with round switches (washers) #heaterunit #lacetti #LEDbacklight