252,066 views
Installing a mixer with your own hands in a simple way (replacement with a similar one), if you pay attention to two important things: 1 - what kind of mixer is there (manufacturer) 1.1 - Russian ones have compression nuts on the side of the eccentrics, when the mixer is removed, they remain, so to speak, on the wall. 1.2 - European ones have compression nuts on the mixer. when the mixer is removed, they remain on it. 2 - pay attention, or rather measure the center distance between the fixing points of the mixer and the eccentrics. Basically, this distance is 14.5 cm, 15 cm, 15.5 cm. We measure so that we don’t have to tighten anything later, but if you know what and how, then you can adjust it. The problem is that when adjusting, situations periodically occur when the winding slips and starts to leak at the connection and you need to rewind it. So replacing a mixer is not difficult, but there are cases. like in this video. when it is better to pay and not suffer, since an inexperienced person will not be able to install a mixer. Curved pipes do not allow you to freely screw the nuts and you have to spend a lot of time adjusting to the state - the golden mean. Such a hassle takes 1.5 hours. Since while you are twisting the eccentrics, it may start to leak (slipping of the winding). Let your installation of the mixer be easy!!!