29,730 views
When assembling a frame for a plasterboard ceiling, it sometimes happens that the profile is close to the wall and it is on it that two sheets with factory edges are joined. In this case, it is necessary to install ceiling hangers and align and secure the profile on them. Craftsmen use different methods for this, the video shows one of them, when the height of the indent from the main base ceiling is sufficient to work with the hanger (about 7 cm or more). The essence of this option: the hanger is cut into two parts and they are screwed to the concrete with an offset relative to each other. Another part of the hanger is screwed to the profile in advance, then it is installed in place and fixed at the ends. From the outside, easily accessible side, the profile is attached to the hanger as usual, from the inside and hard to reach, first temporary fixation is done using a clamp, then part of the hanger from the ceiling is connected to part of the hanger on the profile with ordinary self-tapping screws. It is better to screw the screws not into the holes, but through the metal of the hanger. Installation of plasterboard, alignment of the frame for the ceiling. how to screw plasterboard to the ceiling alone: transverse installation: • plasterboard to the ceiling alone, le... longitudinal installation: • The EASIEST installation of plasterboard on the ... Have you decided to do some apartment renovation? - You can find out everything about installing plasterboard on the ceiling and walls on the channels: Severkola and ProMontaj: technical details, life hacks and design solutions for creating a unique interior. #plasterboardinstallation #plasterboardceiling #ceilinghanger #plasterboardbox #plasterboardframe