**********************Guide******************** 1- In the power selection sections For the systems, for some models, two types of power are recommended. The reason is that in most high-end graphics models, such as 3080 or 3090, 4080, and 4090, you have different power consumption by choosing different models of that card, for example, Galax or Ichill 3080s. It's only 320 watts and even their power limit doesn't increase, but gamerock or rog strix have the ability to remove the limit and consume 400 watts,,,,or 3090, many models have 350 watts, but ftw3 ultra has no power limit of 450 watts!!! So flagship models can sometimes consume 100 watts more, so you can't determine the amount of power just from the chipset of the graphic card, be careful, if possible, ask someone who knows or the seller ********** ***************************************** 2- In many power models of different standards There is, and there may be different numbers such as opp in many undeveloped or unlicensed power supplies, which we gave as an example in the video, Mastrowat 750. By putting these power supplies in some systems, you may face problems such as resetting. ... and this standard difference between different power models can be a problem, so if you want a high-end system with an unknown 800 watt power model, such as vp800 Game Max, ask the experts first 😉 ******** ********************************************* 3- High-end stock powers, for example 750 Watts and above, most of them have been used for mining rig before and they may not have any problems in terms of working (I use the power stock that is opened from the mining rig because of its low price😅), but it may be because of the long time Using the full capacity of these power supplies, the sockets have been melted and replaced, and there may be a high resistance due to bad soldering of the module socket again, so try not to connect the power wires to the replacement sockets, because they will become wet again in high consumption ** ****************************************** 4- In that part of the video, I said motherboard There is no reason to consume more, in fact it is not like that. Due to the power supply circuit of different CPUs on different motherboards, we have different efficiencies on the MOSFET, but the amount of power waste in different circuits from the worst to the best is approximately 30 watts, so basically the difference in the motherboard has an effect, but it is small ****************************************** 0:00 intro 0:22 Conditions of this video 1 08:08 Testing the amount of consumption for the first system 2:35 What effect does 80 Plus have on the amount of consumption!? 4:00 Test of 3 systems with different powers 5:05 Spikes.....or power extrusion 6:50 Ways to deal with spikes in atx2 and 3 8:30 Part 1 of low-end systems 12100 and 13100 9:30 Introduction Power for 12100 and 13100 bundles 11:16 The second part of mid-range systems with 12400 or 13400 12:26 Introduction of power for 12400 or 13400 bundles 12:57 Don't be too hard, high consumption cards can also work with 500 13:38 Choosing power for 12400 bundles and 13400 15:03 The third part of mid-range systems with 12600k and 13500 16:01 Power selection for 12600k and 13500 bundles 16:40 Some good power models from 600 to 750 18:00 The fourth part of the mid-range upwards with 13600k and 14600k 19:44 Power selection for 14600k and 13600k bundles 20:56 Be careful not to damage your power cable 21:43 Part 5 high-end bundles with 13700k or 14700k 22:59 How many watts of power do you need for 13700 and 14700 23:37 Part 6 of high-end bundles with 13900k and 14900k 24:14 How many watts of power is required for high-end bundles 24:29 The best 850 and 1000 watts of power 25:13 Why don't you need more than 1000 watts 25:52 outro