5,659 views
Removing the steering wheel from the Honda Civic, City, Fit, Hr-v, Cr-v, Wr-v To remove the steering wheel from a Honda, follow these steps: 1. Disconnect the negative battery cable: This will ensure that there is no electrical power during the procedure. Be sure to follow safety precautions when handling the battery. 2. Position the steering wheel: Turn the steering wheel so that the wheels are aligned straight, which will make it easier to remove later. 3. Remove the two side screws of the steering wheel using a wrench (Torks 30), carefully remove the cover. 4. Disconnect the airbag cable: With the airbag cover removed, disconnect the airbag electrical cables. There are usually snap-in connectors that need to be pressed or slid to release the connection. Be sure to handle the cables with care. 5. Remove the retaining screws: With the airbag disconnected, you will find two or more retaining screws that secure the steering wheel to the steering column. Use a suitable wrench (usually a 14-inch wrench) to remove the screws. Store them in a safe place. 6. Removing the steering wheel: With the screws removed, you may need to give the top of the steering wheel rim a gentle push to shock the steering wheel into place. Then, pull it out gently without applying force to avoid damaging the threads. Remember to follow these instructions carefully and take appropriate safety precautions. If you are inexperienced or feel uncomfortable performing this procedure, it is recommended that you seek the assistance of a qualified professional.