ACCESS ALL THE CONTENT OF MY CHANNEL: Aviation Curiosities: https://bit.ly/3eMKdje Flight School: https://bit.ly/3dNlkmc Information about Aircraft: https://bit.ly/3nz3W9V Aviation Mysteries: https://bit.ly/2VvKJdJ ​​Aviation News: https://bit.ly/2BjkikW All the videos of the channel: https://bit.ly/2BgKY5S Subscribe to the channel: https://bit.ly/38hOetE DON'T FORGET TO FOLLOW ME ON SOCIAL NETWORKS: Visit my Website: https://bit.ly/3gkhQtj Follow me on Instagram: https://bit.ly/2BtjOZt Subscribe on Telegram: https://bit.ly/3raTEAe Support me on Patreon: https://bit.ly/3eOBYDb Follow me On Twitch.tv: https://bit.ly/3eQ4KTZ On other occasions I have talked about how to land a plane or even how to take off, but there are other equally important maneuvers that I have not talked about on my channel. One of them is how to maneuver a plane during ground operations, either heading from the runway to the terminal or vice versa. Many members of the channel had written to me for some time now to make this video and it was time to comply. Moving on the ground through the different taxiways of an airport does not require the same level of skill that a takeoff or landing might require, but it should be noted that it is an equally important maneuver and demands a high level of concentration on the part of the pilot. This is because during this maneuver our plane will be taxiing very close to other aircraft that are on the ground, in addition to this we must also add, the people who are part of the ramp personnel and the operations vehicles, which include the tanker trucks that supply fuel to the aircraft. During this maneuver, the pilot must pay attention to radio communications while receiving instructions from the airport surface control and thus avoid crossing a taxiway without authorization. Well, in this video I will try to clear up any doubts you may have about this maneuver, we will see from the most basic principles of operation, to the most advanced, either using a single-engine aircraft such as the Cessna 172 Skyhawk or a multi-engine aircraft such as the Boeing 787 Dreamliner. To perform this important maneuver we will use the rudder pedals and the engine power control. Let's go to the simulator and see how it is done. We have reached the end of the video, I hope you have acquired new knowledge. Remember that on my channel you will find other interesting videos related to the wonderful world of aviation. Farewell If you liked the video, don't forget to like and share it, and of course, you can also leave a comment. If you want to continue learning about aviation, I invite you to subscribe to my channel and activate the notification bell, this way you will receive a notice whenever I publish a new video. Remember that you can also look for me on Telegram as Air Captain. Visit me at capitanaereo.com See you soon, see you in the heights! Keywords: How to maneuver an airplane on the ground, how the pedals of an airplane are used, how to brake an airplane during ground operations, why do airplanes have two pedals, how to steer an airplane from the landing strip to the boarding area, how the parking brake of airplanes works, how many brakes a commercial airplane has, what function do the pedals of airplanes perform, how the tail of an airplane moves, what is the tiller of commercial airplanes used for, how to maneuver a passenger airplane when it is on the ground, how to drive an airplane on the ground, how to maneuver an airplane from the boarding area to the takeoff runway, how to maneuver an airplane from the ramp to the takeoff runway, how to maneuver an airplane during ground operations, this is how the brakes and pedals of an airplane work.