How to disassemble, repair and clean the fuel tank in the car, how to disassemble the gasoline tank, how to disassemble and repair the tank, how to disassemble and clean the gasoline tank, cleaning the fuel tank, cleaning the gasoline tank from rust, how to clean the fuel tank, how to clean the gasoline tank, how to clean the gasoline tank, how to weld the gasoline tank, how to weld the gasoline tank, how to weld the fuel tank, how to repair the gasoline tank, how to repair the fuel tank, the correct way to weld the gasoline tank, the correct way to weld the fuel tank, the gasoline tank is perforated, the gasoline tank has a hole, welding the gasoline tank hole, fixing the problem of the gasoline tank dripping, the price of the gasoline tank, the price of the gasoline tank, the problem of a crack in the gasoline tank ------ Useful links for you to subscribe to the channel and get special privileges from here / @sasamh --------------------- Cheap trick to double your car battery life Check it out here • Cheap trick to double your car battery life and... ---------------------- To communicate about business, use the following email For business inquiries contact me at [email protected] Important note: I do not have a maintenance center and I do not repair cars for people --------------------- An Egyptian page with cheap and useful products for cars / caregytech My second channel with quick maintenance videos / @mustafa-experiences On TikTok you will find short videos of car maintenance work https://www.tiktok.com/@mustafa_sasam... We share photos and short videos of what happens behind the camera on Instagram / mustafa_sasamh A site that provides products related to cars and technology at reduced prices https://ban.ggood.vip/XsKP ------ Important information and instructions 1 - As soon as you notice gasoline under the fuel tank, you must quickly start disassembling the tank and repairing it and do not be lazy about a defect like this because it is very dangerous 2 - Stick to the same order Literally in disassembly and assembly and do not make an effort 3 - The presence of the cloth under the screwdriver is very important so as not to cause a spark 4 - When freeing the ends of the fuel pump hoses, be patient so as not to break any of them because they are made of plastic 5 - When disassembling and installing the pump, you will find a distinctive mark on its metal surroundings for the location and direction of installation 6 - The higher the car is from the ground, the easier it is to empty most of the fuel and it is preferable to do this work with the fuel tank almost empty 7 - Staying away from any source of spark or flame is the most important thing during work 8 - Always keep the car's fire extinguisher within reach during work as a traditional and recommended safety measure 9 - While storing gasoline in an external container until you finish work, keep it away from any source of flame or spark 10 - Q20 is characterized by high speed in penetrating rusty nails stuck due to heat 11 - If you find that freeing the hoses from the tank is difficult for you, loosen the tank mounting screws adjacent to the hoses to make room for you 12 - You will not need To close the gasoline discharge line from the pump because it does not leak air 13 - The purpose of closing the fuel tank before lowering it is first so that no gasoline spills out of it if you make a mistake and it tilts from you while lowering it, and secondly so that it is ready and tightly closed during the air pressure test 14 - Some people prefer to weld the tank with cold welding using tin, and some complain that cold tin welding has a short life because the tin can cannot heat the tank iron to merge the tin with the iron, but using the same steps explained from emptying the tank and securing it, you can weld the tank at that time with copper or iron because it is very strong and durable, and during welding, all the hose openings and the gasoline pump opening are open for ventilation 15 - After welding and emptying all traces of water, use 3 liters of gasoline, put them in the tank and move them all over the tank, then empty them to get rid of any traces of water that may remain 16 - Upon final assembly and after pouring gasoline into the tank, dry the place well before using a screwdriver and hammer to tightly close the gasoline pump. End of explanation Don't forget that watching the ads on the video is support for me to continue, and you can get benefits and support the channel by subscribing to it from here / @sasamh