11,312 views
LEARN NOW about retroreflective sensors with interface relays! Electrical Controls Class. When designing an entire monitoring system for an industrial process, one of the essential items for this function is sensors. With them, it is possible to know the progress of each stage of the process and make everything as automated as possible. However, sensors have some limitations, such as low current capacity. Because of this, it is necessary to use the resource from today's class, which are interface relays. Interface relays are devices that are extremely similar to the contactors used in our electrical control classes, but they are smaller and the coil consumes a current much lower than the contactor. In addition to the application with sensors, we can also install them together with PLC (Programmable Logic Controller). Be sure to watch this class and learn about one of the fundamental resources for electrical controls, industrial automation and any other system that requires process monitoring that requires the activation of a load that consumes power greater than the sensor's capacity. The sensor used supports conducting 300mA which makes it impossible to use in a contactor, but fully compatible with the interface relay. Extremely useful in electrical commands and automation. For this reason, we can use it with the sensors that we will study in our electrical commands classes. Good studies! CHANNEL website: https://trickdrawing.com Instagram: / trick.drawing Download dynamic blocks in DWG: https://bit.ly/2YWE655 Our Telegram channel: https://t.me/trick_drawing DO NOT CLICK HERE: https://bit.ly/3hNh9dq #electricalinstallations #electricalcontrols #automation #Povaepovo #TrickDrawing #PatrickSilva #nbr5410