How to drain your 4-stroke motocross bike - Motorcycle tutorial #6 - 3as-racing - World Latest Movie, Series, Videos and Trailers

How to drain your 4-stroke motocross bike - Motorcycle tutorial #6

148,759 views

Published on Sep 18, 2017

About :

How to properly drain your motocross bike First of all, it is important to know your bike, whether you ride a 2T or 4T engine. A 2T engine requires an oil change from your gearbox, since your engine is lubricated via the mixture you make in the gasoline. The oil suitable for your bike will therefore be the gearbox oil. Or, if you have a 4T engine, you will need a specific oil to lubricate both your engine and your gearbox. You will therefore understand that this step should not be neglected in order to give your engine a longer life. The steps to drain your bike: Run your bike for 2 minutes Remove your skid plate Position a basin to collect the used oil under your bike. Unscrew the drain plug under your engine, and open the filler cap to create an air intake so that all the oil can drain. Screw your cap back on, degrease your engine and replace your oil filter. Fill your engine with the oil suitable for your engine while respecting the capacity recommended by the manufacturer. Finally, the last step, start your motorcycle for a few seconds to check if the oil level is correct. 3AS RACING advice for changing the oil in your motorcycle: We recommend changing the oil every 15 hours (less if you are a competitor) If you have a 4-stroke engine, change your oil filter every oil change. To find out the oil capacity and the correct viscosity for your motocross, enduro, you can find the information in your machine's manual, or you can call us on 05 57 95 56 10, we will inform you about the viscosity and the oil capacity for your machine. Another tip, if you can't remember the number of hours of riding, opt for an hour meter. In addition to using it for your oil change, it will be an excellent indicator of the number of uses for your piston. We hope to have helped you with your next oil change, have a great ride everyone. Here is a list of the main equipment you need: ➡Doser with funnel https://www.3as-racing.com/CT-42760-d... ➡Degreaser spray. https://www.3as-racing.com/search.asp... ➡T-wrench, socket. https://www.3as-racing.com/CT-42685-D... ➡Oil filter (if you have a 4-stroke engine). https://www.3as-racing.com/CT-45215-f... ➡Drain plug with a new washer (if too worn) https://www.3as-racing.com/CT-44114-b... ➡Engine oil or gearbox oil. https://www.3as-racing.com/CT-42716-h... ➡A drain pan to collect the used oil. https://www.3as-racing.com/CT-42773-e... 3as racing, the largest selection of motorcycle parts https://www.3as-racing.com/ Subscribe: / @3as-racing Our FB: / 3asracing Our Instagram: / 3as_racing Video presented by: Docteur Biclou And Simon Peterolff from @SIMONSGARAGE Youtube: / simonsgarage Directed by @MartinPeterolff and produced by Khulan Agency http://www.khulan-agency.com/

vidoe Comments

Trend Videos