29,594 views
At your request. ⠀ Before purchasing a Pattern for a conditionally standard figure, you can compare all your parameters, measurements with the measurements in the table. And you will already understand what adjustments you will need to make if you have specific features of the figure. ⠀ The excess of the figure is mainly determined by the measurements of the length of the shelf and the length of the back. And it is better to make these adjustments immediately, before cutting, otherwise, with large values, the length of the product in the front may be significantly less. And the width along the back may not be enough. ⠀ If the back according to the measurements turned out to be not less, but longer than the standard, then we add, this will remove the tension along the middle seam too. But if you added, match the side cut with the cut of the shelf, due to the dart. ⠀ With an excess of figure, it is better to make a layout. ⠀ There are many adjustments, but start with the shelf, this is enough for many, it depends on the model, the degree of fit, etc. ⠀ The main thing is to understand the meaning. ⠀ ⠀ -- If you like our blog and want to support its development - https://vikroy-ka.ru/sponsor/ -- Create patterns according to your sizes on our pattern creation service https://vikroy-ka.ru/ The pattern is generated automatically immediately after entering the size characteristics --- Follow the news on social networks: Telegram: https://t.me/vikroyka_service Telegram chat: https://t.me/vikroyka_chat VKontakte: https://vk.com/otailor Odnoklassniki: https://ok.ru/group/54312598044746 Yandex.Zen: https://zen.yandex.ru/vikroyka Pinterest: https://www.pinterest.ru/vikroyka/ Youtube / vikroyka RuTube https://rutube.ru/channel/23321427/ #correctionofpatterns #patterns