147,029 views
Your oil seal is leaking? And you don't know how to do it? To avoid any danger and improve handling whether you're on a motocross or road bike, Doc and Simon give you their tips for changing your fork oil seals. Order your oil seals on 3AS and here are the tips for fitting them: All the necessary equipment: Fork cap wrench Flat screwdriver Socket Oil seal Heat gun Tape Thick grease Gloves Fork oil Brake Cleaner container Drain pan Flat wrench To disassemble your motorcycle's fork, follow Doc's steps carefully: 1. Disassemble your oil seals 2. Open all the compression and rebound adjustments on your fork. 3. Unscrew the fork leg nut. 4. Remove the rebound rod. 5. Drain the oil from your tube. 6. Loosen the fork cap. 7. Remove all the parts such as the cartridge and spring. 8. Remove the dust cover, clips. 9. Disconnect the entire fork to remove the rings and seals. 10. Degrease and clean the fork components thoroughly. Here are the steps to reassemble your fork: 1. Protect the end of the tube with tape. 2. Reassemble the components with grease. 3. Insert the oil seal into the sheath using the socket. 4. Place your spring, cartridge and screw the fork cap. 5. Insert the rod and screw the entire fork back on. 6. Fill your fork with oil, respecting the desired quantity. 7. Close the entire fork. 8. Adjust your fork for compression and rebound. The mystery is over, you will be able to impress your friends in the paddock with your brand new fork oil seals! But also teach them how to change them! Good mechanics! #TutoMoto #TutoMotocross 3as racing, the largest selection of motorcycle parts https://www.3as-racing.com/ Subscribe: / @3as-racing Our FB: / 3asracing Our Instagram: / 3as_racing Video presented by: Docteur Biclou And Simon Peterolff from @SIMONSGARAGE Youtube: / simonsgarage Directed by @MartinPeterolff and produced by @Khulan-agency http://www.khulan-agency.com/