If your LG washing machine makes strange noises when spinning or you notice an unusual movement or blockage in the drum, then the bearings are probably worn out and no longer do their job. But don't worry! In this video we show you how to replace the bearings yourself. Device used: LG F14470TD washing machine ✅ Save time and money by repairing your household appliances yourself with our practical tips and instructions ➡➡ https://werkstatt.sos-zubehoer.de/ If you have any questions, feel free to leave a comment below. We look forward to answering them! ========================================== 0:00 • Introduction 0:29 • Tools for the intervention 0:57 • Dismantling the panels 1:28 • Dismantling the rotor + stator + resistance and probe wiring 3:06 • Disconnecting the solenoid valve 3:28 • Dismantling the pressure switch + vent hose + control panel 4:06 • Removing the product drawer + disconnecting the hose 4:33 • Removing the display 4:53 • Removing the skirting board above the pump hatch 5:13 • Removing the door locking ring 5:53 • Dismantling the front panel + cross member 6:50 • Removing the irrigation hose + counterweight + shock absorber 9:00 • Removing the tank hose 9:20 • Removing the springs 9:45 • Access from the drum to the drum 10:37 • Checking the drum axis; Checking the crosses 10:56 • Removing the seal and the 2 bearings of the rear half drum 15:15 • Replacing the seal and the 2 bearings of the rear half drum 17:28 • Checking the drum axis and cleaning it 18:15 • Reassembling the drum to the drum block 20:20 • Reassembling the springs + shock absorbers 21:30 • Assembling the tank hose + pressure chamber + pressure hose 21:54 • Reassembling the hose from the product drawer to the tank 22:07 • Fixing the counterweights + irrigation system 22:41 • Reassembling the product drawer, the vent hose, the solenoid valve and its 2 connectors 23:14 • Assembling the front panel 24:05 • Reassembling the seal and the locking ring 24:34 • Installing the baseboard + control panel + product drawer + crossbar 25:37 • Installing the stator, rotor and the probe connection plug, the resistor and the ground wire 26:15 • Locking the wiring; fitting the inspection door; the top panel ========================================== SOS ACCESSORIES, leader in spare parts https://www.sos-zubehoer.de/ We explain our methods from A to Z. Since 2008 we have developed a unique expertise to help you with repairs with continuous support through our advice and tutorials. ======================================== ★ DO YOU NEED A SPARE PART? Find a drum bearing for your washing machine: https://www.sos-zubehoer.de/ersatztei... ★ OUR NEWS AND TUTORIALS Follow all our news on our YouTube channel: / @soszubehor ★ OUR FACEBOOK PAGE: Become a pro on social networks and follow us on our Facebook page: / soszubehor ========================================== DIY and repair are within everyone's reach! Contact us and benefit from our advice. You are on the right video! Good luck with the repair! #beltchange #dryer #Whirlpool