⚡ Do you want to be a successful electrician? Check out my complete training. Click here ???????? https://www.eunaupmotors.com.br/eletr... --------------------------------------------------------------------------------------- The half light on the turn signal is a very common modification to be made because it brings a more modern and illuminated appearance to the front of the car. However, this is a modification that is not permitted by law for driving on the streets and should only be used in event parks, although some use it on the street as well. In order to be able to use the half light on the turn signal and the normal half light inside the headlight as the customer wishes, then today we are going to talk about a way to do this with a 3-position toggle switch. Originally the headlight has a socket and 5w bulb for the turn signal light and another socket and 21w bulb for the turn signal light. The objective here is to transfer this taillight light to the same position where the turn signal light is in order to illuminate this point with 5w with its yellow light. The most effective way to do this, which is similar to the original, is to replace the original 1-pole socket with a 2-pole socket and replace the bulb at the same time. This 3-wire socket will replace the original 2-wire socket for the turn signal, with the negative wire being the same, and the turn signal wire from the original socket connecting to the wire that turns on the high phase of the new 2-pole bulb, while the wire that turns on the low phase of the 2-pole bulb is connected directly to the positive wire of the half-light socket. This way, when we turn on the turn signal, the original turn signal will turn on and the low phase of the 2-pole bulb in the turn signal position. If you want the half-light only on the turn signal bulb, then remove the original bulb from the turn signal socket. But what if the customer wants to have the option of switching between the half-light together with the turn signal bulb or in the original position? To do this, you will need the help of a 3-position toggle switch. This will have 3 connection pins below it. We will make the following connections to these 3: connect wire 58 that comes from inside the car to power the bulbs to the middle pin; connect the wire that goes to the low phase of the turn signal bulb to one of the pins on the side; and connect the wire that goes to the socket of the original half-light bulb to the pin on the other end. This way, we will have the positive signal of the half-light on the turn signal bulb and the hours on the original half-light bulb as we switch the switch to the leftmost or rightmost position. I hope I have clarified the system for connecting the half-light on the turn signal with the toggle switch to choose between the original and the adapted one. I will be here waiting for you with our next topic. Thanks. Complete Courses, all in one place! I teach you with the best techniques of today, with my method that has already been tested and approved by more than 2,600 students in Brazil and other countries. The most complete course in Brazil, no bullshit. I know what works in practice in a workshop and I will teach you in a simple and online way, from basic to advanced. You will learn, even if you have no knowledge, until you perform the services just like the best professionals you know. ⚡ Successful Electrician. Click here ???????? https://www.eunaupmotors.com.br/eletr... ???? Car Sound System Installer. Click here ????????https://www.eunaupmotors.com.br/insta... ---------------------- ▶ SUBSCRIBE TO THE CHANNEL / upmotorscentrodeforma%c3%a7%c3%a3oautomotiva ---------------------- ????FOLLOW ME ↴ ▶ Facebook: / eunaupmotors ▶ Instagram: / eunaupmotors ▶ Telegram: https://t.me/Eletricista_UpMotors ▶ Website: https://www.eunaupmotors.com.br/