461 views
I found a simple wooden project to make a tutorial on Fusion 360 for beginners and those who have never dared to start with Fusion 360. I talk about the creation of the account, the installation and the basic functions of beginners to use Fusion 360 for free. It is a base in Baltic plywood to raise a computer monitor so that it is at the same height as the second one. There was a small problem with the CNC during the design so a correction was necessary. ___________________________________ WEBSITES: Fusion 360: https://www.autodesk.com/ca-fr/produc... Good tutorials on YouTube: / @creadin3d / @manuelwarland / @rodam3d CNC software: https://www.estlcam.de/ _________________________________________ MATERIALS USED AND ACCESSORIES: 19mm Baltic plywood Boehm punches: https://www.boehm.fr/ 3M masking tape Cyanoaclylate glue: https://normand.ca/ca_fr/adhesif-supe... ___________________________________________ 0:00 Intro 0:31 Installing Fusion 360 2:10 Taking measurements 2:43 Getting started with Fusion 360 7:00 Saving to DXF 7:37 Putting in 3D and STL file 9:53 ESTLCAM software for CNC 10:06 Preparing the wood 10:56 CNC 12:15 Error correction 13:13 Finishing 13:49 Conclusion ________________________________________ Feel free to leave me a comment for any questions or suggestions. No affiliate links or sponsorships. The links in the description are only to help you find this product and have more information. To subscribe: / @stamshop __________________________________________ WARNING: Never leave a laser engraver running unattended. Always adapt ventilation and/or PPE for all projects and equipment use. Always check if the product used with a laser engraver is toxic and/or suitable for this use. For metal and woodworking, always wear appropriate equipment and follow safety rules. Video does not replace safety rules. Lettering: https://fr.textstudio.com