639,322 views
High fuel consumption (the injector is pouring) or the car does not start at all, all this can be caused by a malfunction of the fuel system. How to check the operation of the injector on a car with a single injection system. It is advisable to check on a warm engine. Disconnect the air duct from the cover (turtle) of the single injection. Disconnect the vacuum tubes and remove the cover. Start the engine. Look at the spray pattern of the fuel stream. The stream should be continuous and clearly visible against the background of the throttle valve. Increase the engine speed to 3000 rpm, then sharply close the throttle valve. In this case, the stream should stop for a short time, which corresponds to the forced idle mode. Turn off the engine. Wipe the injector spray and check for drops. Fuel is allowed to pass through the injector spray, but not more than two drops per minute. So if, as they say, it eats gasoline, check the injector. ???? Friends! Your support is very important! You can help with your ruble here https://www.donationalerts.com/r/andsk64 ????All the tricks and secrets of Volkswagen and Audi repair ???? https://vk.ru/vagguru ????Telegram, where all the answers to questions ????https://t.me/+fMNhVhSfxycwZWYy Zen channel https://zen.yandex.ru/severny Mail: [email protected] If the video helped you and you want to help develop the channel Sberbank card: 4276 1609 2679 5262 Andrey S. Subscribe! Like if the video was useful!