2,372 views
The cooling circuit in Fords must be ok ???? You must check constantly at high and slow fan speeds and use original water diluted 50/50 and change the radiator cap if it is damaged and the water pump must be original and free from corrosion and rust and the valve must be changed every period The radiator is cleaned and sealed or changed Warning: The water is diluted 50/50, meaning half concentrated and half distilled water. Regular water rusts and causes corrosion of the water pump fins from the inside and does not dissipate heat properly. The engine temperature sometimes reaches 100 degrees Celsius and this will cause an increase in the temperature of the water and it will reach the boiling point and cause high pressure inside the cooling circuit. This is not good for the engine in the long run. It is better to use original water because the boiling point of original water is above 130 degrees Celsius and thus it will dissipate the heat properly and will not boil or cause high pressure inside the cooling circuit. The valve needs to be checked and changed every period The fan is always It operates at different speeds. It does not have a specific speed. Depending on the need, its speed increases and decreases. If you turn on the air conditioner, the fan will operate immediately at slow speed. If the fan does not work with the air conditioner or only works at slow speed, check it or change it. #Ford Ford #Ford Ford #Ford Fords #Fords Fords #Crown Victoria Crown Victoria #Grand Marquis Grand Marquis #Grand Marquis Grand Marquis #Lincoln Lincoln #Lincoln Lincoln #Town Car Town Car #Towncar Towncar #Toncar Toncar Fan Fan Fan Radiator Radiator Water Water Water Water Water Water Valve Valve Temperature Temperature Temperature Water Water Bottle Water Bottle Bottle Motorcraft Motorcraft Preston Max for American Cars Distilled Water Distilled Madrak Man #Madrak_Man