113,163 views
Do you have a serious case in your car? Write in the comments, we will gladly come and record a video with you. The video shows a serious case, where after several oil changes with a flush - the carbon deposits were removed. What could have happened in this car if the engine had not been flushed? New oil poured into the engine would not be able to remove lumps of burnt and old oil, which, as you can see in this video, blocked the oil channels, but the flush slowly softened the lumps of oil and turned them into liquid oil. The most important thing is that the oil channels were unblocked, the strainer and filter were not clogged and the engine is now lubricated, the client saw the difference in the engine and now knows that she should regularly use the TEC 2000 oil flush, we invite you to watch, and contact us if you want to record videos with us. Best regards. #tec2000 #automotive #workshop TEC 2000 Engine Flush should be used during a standard oil change. The preparation should be added to the engine, still to the old oil. The engine should reach normal operating temperature. After adding the product, the engine should idle for about 10-15 minutes. After this time, drain the old oil, install a new filter and top up with new oil. If the engine has problems such as sticky rings, uneven compression, increased oil consumption or black smoke, work with the product should last about 25-30 minutes before the oil is changed. The unique combination of very effective detergents together with very effective lubrication allows the product to be used in all combustion engines - petrol, diesel and gas powered. The operation is completely safe for the engine.