2,186 views
This video covers errors that occur when working with the Px script. You can also read the document, which contains a full description of possible errors: https://injectorservice.com.ua/docs/u... Video content: Errors that occur when working with the Px script: Incorrect pressure sensor channel number; Incorrect timing sensor channel number; The timing sensor channel number matches the pressure sensor channel number; The pressure sensor or its pneumatic channel is faulty, or the sensor type is specified incorrectly; The pressure sensor signal is not detected; The timing sensor signal is not detected; Connect the timing sensor to the high-voltage wire of the cylinder being tested; Insufficient data for analysis; it is recommended to repeat the measurements; Incorrect sharp revving; Sharp revving not detected; A section suitable for checking the valve timing was not detected; Idle section was not detected; The fragment of oscillograms provided for analysis is too short; Full throttle opening not detected Poor (or insufficient) cylinder filling at … (probably the throttle valve was not fully opened); The cylinder is leaking. For a more complete report, repeat the test after troubleshooting, or test other engine cylinders; Failed to check the valve timing; please repeat the test or check the timing manually; Check if Adobe Flash Player ActiveX is installed on your computer;