Embedding mesh on polystyrene - instructional video
426,323 views
About :
More information on the website: www.majsterpol.pl When starting to implement the reinforcing layer, make sure that the working and drying temperature is between plus five and plus twenty-five degrees Celsius. Work should not be carried out in direct sunlight and rainfall without the use of protective mesh. We can start making the reinforcing layer after the polystyrene boards have completely bonded to the substrate, but not earlier than after forty-eight hours. Before starting the work, the polystyrene boards should be sanded. When starting the work, we must prepare the appropriate tools and materials: a low-speed mixer with a basket mixer, adhesive mortar for embedding the mesh "Styrolep Z" MajsterPol glass fiber mesh, a notched trowel 8-10 mm, a trowel, a knife and a meter. We start the work by preparing the mortar. Pour the entire contents of the bag into a container with a measured amount of water and mix thoroughly with a low-speed mixer with a basket mixer until a uniform consistency is obtained. After waiting five minutes and mixing again, the mortar is ready to use. In the first step, apply the adhesive mortar with a notched trowel to the surface of the polystyrene board. The thickness of the applied mortar should be about two millimetres. Apply the mortar at one time to the width of the reinforcing mesh. Then, immediately embed the mesh by pressing it into the adhesive using a trowel. In the next step, apply a levelling layer of adhesive up to one millimetre thick, so as to completely cover the mesh. The total thickness of the reinforcing layer should be from three to five millimetres. When embedding subsequent fragments of the mesh, remember to maintain a ten-centimetre overlap. We can start applying the plaster after the reinforcing layer has dried, but not earlier than three days after its implementation.
299,194 views 3 days ago
1,697,741 views 7 days ago
158,433 views 2 days ago
1,611,716 views 11 days ago
148,460 views 4 days ago
344,482 views 1 day ago
1,197,796 views 2 days ago
189,577 views 4 days ago
344,482 views 1 day ago
Google AdSense
336 x 280
336 x 280
Up Next
Matrix Fishing TV România
9,546 views
7 months ago
7 months ago
Matrix Fishing TV România
6,957 views
2 months ago
2 months ago
Matrix Fishing TV România
7,160 views
3 months ago
3 months ago
Fish Hacker
15,095 views
6 days ago
6 days ago
Pescuit la feeder
10,634 views
1 month ago
1 month ago
Alex Bucur
13,950 views
3 weeks ago
3 weeks ago
Hai la Pescuit!
8,946 views
2 weeks ago
2 weeks ago
Marian Pescarul
1,291 views
9 hours ago
9 hours ago
CARP FISHING IN EXTREME CONDITIONS IN NOVEMBER! FIGHT THE WIND AND FINALLY SURPRISES ON THE DNISTER!
Pescarul Nicolae
4,756 views
3 days ago
3 days ago
Plecat La Pescuit
12,271 views
9 days ago
9 days ago
BEMUTI Fishing
1,548 views
2 weeks ago
2 weeks ago
FOX PESCUIT LA CRAP TV
14,001 views
8 months ago
8 months ago
山口農園機工
46,704 views
1 year ago
1 year ago
ノボル【山口県の田舎暮らし】
74,103 views
3 months ago
3 months ago
こうち農業ネットチャンネル
8,629 views
1 year ago
1 year ago
kogen /家のお外のDIY
803,670 views
3 years ago
3 years ago
かぼすTV
56,407 views
1 month ago
1 month ago
家作り反面教科書
61,000 views
6 days ago
6 days ago
太郎の仕事話
22,790 views
4 months ago
4 months ago
Google AdSense
336 x 280
336 x 280