50,945 views
How to install an alarm system yourself? How to set up an alarm system? You will find answers to these questions in the video. In my particular case, installing a StarLine E96 v2 BT 2CAN+4LIN 2SIM GSM+GPS alarm system in a Niva 4x4 3d (LADA Niva Legend) car. SUBSCRIBE ► / @zvucovoy 00:00 Introduction 00:24 https://install.starline.ru/ - instructions for installing an alarm system on your car 00:57 https://can.starline.ru/ - CAN module firmware 01:32 https://help.starline.ru/slm/ru/skach... - StarLine Master program 02:18 connectors of the main unit of the StarLine 6th generation alarm system 03:18 connecting the X1 connector of the StarLine 6th generation alarm system 05:20 how the 5-pin relay works 06:15 connecting the blocking relay, siren 07:04 connecting electric locks / central locking (blue, green wire of the alarm system) 09:22 connecting light signals (emergency lights) 10:39 input of the trunk, doors, hood limit switch 12:10 connecting the X2 connector of the StarLine 6th generation alarm system 13:13 connecting the launch module 14:25 Connecting the alarm to the computer, updating the firmware 16:21 Setting up connector X1 of the main unit of the StarLine 6th generation alarm system 17:07 Setting up connector X2 of the main unit of the StarLine 6th generation alarm system 17:40 Flexible logic 19:46 Setting up the Main parameters of the alarm system 24:30 Setting up Engine start 26:39 What is software neutral? How to perform software neutral? 29:17 Autostart modes, engine blocking and status output 30:13 Setting up sensors, Diagnostics, Installer's memo 30:53 Telematics 34:35 Registration on the website https://starline-online.ru/ vk ► https://vk.com/zvucovoy Support the channel, for the purchase of new speakers ► https://www.donationalerts.com/r/zvuc... #sound