120,847 views
In this video I show the process of making a Ceramic heater using a carbon fiber heating cable. To make the heater you will need: Porcelain tile 60x60 cm 1 pc. Carbon fiber heating cable 12 to 33 ohm 7 meters Wire 2x1.5 2 meters Heat shrink Metal sleeves 2 pcs. Construction tape Mounting glue or liquid nails Metal Z-shaped corners 3 pcs. (or regular corners connected to each other 6 pcs.) Tile adhesive (cement for tiles) Aluminum profile 2x2 Electrical plug 1 pc. Thermal insulation 60x60 Decorative aluminum corner Knife, Pliers, Hair dryer, Tape measure. The total cost of materials (excluding tools) was 43 AZN, or $25, or RUB1,961 P/S If you make more than one panel, each subsequent one will be 16 AZN cheaper, since the mounting glue will be enough for at least 4 panels, and you can use as much aluminum profile as you like. It is also not necessary to make a edging, which costs 5 AZN. Thus, the heater can cost you 22 AZN, or $13, or RUB1,000. Try it and you will definitely succeed, and if you have any questions, contact me, I will always help with advice.