10,423 views
✅ ???? ???? How to build a slatted partition yourself ⬇️ =================== ✅ Slatted partition walls: https://www.drdlik.cz/lamelove-pricky ================== ???? Instagram drdlik???? / drdlikcz ???? Facebook drdlik ???? / drdlik ====================== Partition walls and partitions made of slats Partition walls are used wherever you need to create a semi-transparent room divider and at the same time provide sufficient intimacy in the living area, but do not obstruct the unique view outside. They are perfect as a room divider such as: slatted partition walls for stairs, hallway and coat rack walls, dining slatted walls, living slatted walls with TV. Partition walls for the office, nursery, reception or restaurant. Types of partition walls We offer individual slats and complete sets for assembling slatted partitions that will beautifully complete the interior of your home. Individual slats provide the opportunity to decide on the look you get during assembly. The individual slats are not connected into panels, so you can choose the spacing between the individual slats. Complete wall sets are ready to install in widths from 51 to 251 cm, you don't need to drill or machine anything - just screw them together. HOW TO INSTALL A SLATE PARTITION WALL 1, In this video we will show you how to install a slat partition wall. We will prepare assembly glue, a drill, an Allen key, a spirit level and, if necessary, a hand saw for cutting. 2, The set includes pre-drilled slats for the ceiling and floor, pre-drilled vertical slats, end caps, wooden pegs and screws. 3, We place all the parts on the floor. We screw the vertical slats to the horizontal slats with screws. We will attach the two outer slats later. 4, We apply glue to the floor at the installation site. We place the wall in the designated place and check the verticality with a spirit level. 5, Then we drill the dowel holes in the upper slat and in the ceiling. We attach the slat wall to the ceiling using dowels and screws. 6, Finally, we mount the first and last slats using wooden pegs and glue, and glue the caps. 7, If we need to reduce the height of the wall, we cut the slats with a hand saw and drill the holes for the screws. We do it differently! [email protected] ????