262,773 views
CONTACT INFORMATION: / autoesthetician Hello friends, in this video we touched up a deep scratch on the vehicle paint. First, we did a steel touch-up. However, since it was noticeable from close angles, we filled it and touched it up with sandpaper. I tried to explain all the details in the video. If you have any questions or questions, you can reach me from here or on Instagram and get information. I hope this video will be useful. Materials used: Vehicle paint 30 grams Mobihel hardener (not fast). Don't get hung up on the brand... Touch-up steel (there are plenty of Köksal touch-up steels on the internet.) Thin brush (can be obtained from stationery stores.) Dayson masking tape Heavy coat paste 2000 water sandpaper (both new and old) 3000 trizact Rotary polishing machine Isopropyl alcohol (especially undiluted in white paints. Although its solvent is low, it dissolves when left to stand.) Application method: The area to be applied is cleaned. If there is a dent in the scratch area, the application is made after the dent is corrected. The inside and the edges of the scratch area are sanded with fine 2000 sandpaper and the roughness is removed. Apply 3/1 ratio touch up paint layer by layer and wipe the edges. If the result obtained with steel touch up is not liked in applications made at different times, tape is applied to the edges and filling is done. The filling is completed by sanding and polishing at least 7 days later.