300,626 views
ADVERTISING You can buy the CAT 6A / CAT 7 crimp connector for installation cables / installation cables here: https://www.amazon.de/VESVITO-Crimpst... In this video I show how to assemble an RJ45 CAT 6A crimp connector onto a CAT 7 SFTP installation cable. (Instructions for crimping an RJ45 plug on an installation cable / data cable) All the material you need: 1. VESVITO CAT 6A RJ45 crimp plug for installation cable / installation cable (available in four colors): https://www.amazon.de/VESVITO-Crimpst... 2. CAT 7, 7A or 6A network cable / installation cable / installation cable AWG22 - 24 (with wires Ø 1.2 - 1.45 mm with insulation; outer sheath diameter up to 8 mm): https://amzn.to/3ykVpww IMPORTANT: If the diameter of the individual wires is smaller than specified, use a different plug, for example VESVITO RJ45 CAT 6 crimp plug for network cable / patch cable (with wires Ø 0.9- 1.1 mm; outer sheath diameter up to 6.3 mm): https://bit.ly/3BldmNr 3. Stripping tool: https://amzn.to/38jTjST 4. Side cutters or scissors: https://amzn.to/3sZBQZx 5. Suitable RJ45 crimping tool, for example: VESVITO crimping pliers RJ45, 8P8C, for shielded CAT 6A, CAT 7, CAT 7A connectors with strain relief: https://bit.ly/2UVKPOR 6. Network tester: https://amzn.to/3kxweSC Make sure that the same pin assignment variant (T568A or T568B) is used on both sides of the cable.