113,639 views
Article with detailed instructions on Drive2: https://www.drive2.ru/l/5174986177039... Part numbers used to change the oil in the Jatco CVT8 variator with a 2.0 MR20DD engine (part numbers are different with a 1.2 liter engine): Original oil for the Nissan NS-3 variator, 2 cans of 5 liters - KE90999943, KE90999943R. Oil pan drain plug gasket (same copper ring as for the engine sump plug) - 11026-01M02. Pan gasket - 31397-1XF0D. Coarse filter (can be washed, it is not necessary to change, but it is better to replace) - 31728-1XZ0D. Coarse filter sealing ring — 315261XG0A or 31526-1XZ0C. Fine filter — 31726-28X0A, analogs: 31726-3JX0A, 317263XX0A. Fine filter sealing ring — 315263VX0A. Ring for overflow plug of level control (reusable rubber, does not need to be changed) — 315263VX0B. You also need to buy any carburetor cleaner and degreaser. List of main consumables for Nissan Qashqai J11: https://www.drive2.ru/b/5102085807338... This is a video instruction for a complete oil change in the continuously variable transmission Jatco JF016E (aka variator: CVT8, RE0F10D) with your own hands, on a Nissan Qashqai II J11 2.0 l, 144 hp. This model of the JF016E variator is installed on cars with an engine capacity of up to 2.5 liters starting from 2012: Nissan Altima, Murano, X-Trail, Sentra, Serena, Teana, Tiida, Rogue, Qashqai, Mitsubishi ASX, Lancer, Outlander, Renault Kaptur, Clio, Koleos, Fluence, Suzuki SX4. Important! In order not to strip the threads, tighten the bolts on the CVT pan only with a torque wrench with the tightening torque specified in the service manual: 7.9 Nm. This CVT has a plug instead of a dipstick, so the level is set using the overflow plug. Be sure to set the level when the CVT fluid temperature is from 35 °C to 45 °C. You can measure the oil temperature in the box using the ELM327 v1.5 adapter: Adapter with the correct chip: https://clck.ru/FYuUT You need the CVTz50 program - CVT diagnostics for Android via ELM327: http://cvtz50.info/ru/ I took temperature readings using the Launch EasyDiag scanner. Official Launch store on AliExpress: https://clck.ru/FYuWJ After a complete oil change in the CVT, do not forget to reset the fluid degradation counter to zero. This can be done using the ELM327 adapter. Do you need help buying a good used car? Call: +7 925 05122 95 Alexey #autotester Website - http://autotester.su/ E-mail: [email protected] Youtube channel: / @avtotester