181,307 views
Hi!!!! And hophophop! another tutorial on brakes! This time it's using a syringe to bleed your brakes. Here are the steps: 1- remove the dirty brake fluid in the master cylinder 2- fit a hose to the bleed screw with the clamp 3- fill 30cc of brake fluid in the syringe (same liquid as was previously) 4- fit the syringe to the hose 5- bleed the hose 6- push the syringe piston then open the bleed screw 7- wait for the fluid to rise with the bubbles in the master cylinder 8- continue to push on the piston while closing the bleed screw 9- check the brake handle 10- if necessary repeat the operation 11- if necessary do a normal manual bleed to check for bubbles trapped upstream of the bleed screw 12- clean the excess brake fluid with water and a dry cloth. The advantage is that you really save time to prime/change/bleed your brake system. After this braking system is without ABS and it is not that of a car!!!. It is on a basic motorcycle system without ABS and without brake servo. ATTENTION: do a quiet road test at low speed before taking the road and check the fluid level and the absence of brake fluid leaks. I hope you liked it!!! See you soon!