20,953 views
You can get a certificate for purchasing accessories for gate automation here. https://novi-vorota.com.ua/sertyfikat... You can read about automation for garage doors here https://novi-vorota.com.ua/avtomatika... At this facility, we need to install Professional automation for garage overhead doors. But our installation will not be standard, since the gates here are with an increased lift, and we will install ceiling automation. Only shaft-type automation is usually installed on such gates, and it costs three times more than ceiling automation. We will install ceiling automation, but it will work no worse than shaft automation. First, we attach the rail to the ceiling. For this, we use the brackets that come with the kit. We attach the bracket to the gate. To connect the ceiling rail with the curved rail on the gate, we cut out two 1.5-meter rails. The rope that comes from the drive is used to switch the automation to manual mode. To record the remote control in the memory of the automation, there is a special button on the board that you need to press, the LED will light up. Next, press the button on the remote control and hold for a couple of seconds.