98,672 views
In the film I show how I made a wood splitter. The machine was built some time ago and for this reason unfortunately I do not have any recordings from the construction of the auger or pulley. The table is very similar in construction to the one I shared in another film on my channel: • A workbench of my own design on... In addition, I show step by step what the device consists of. As a current control I used a cam switch, the so-called left-right to change the direction of the auger's rotation. This is a useful function in a situation when the auger gets blocked, then you can cause the auger to rotate in the other direction and the stump is ejected from the machine, which I show in the film. NOTE!!! I do not discuss connecting the cam switch, because I am not an electrician. I show it only as a curiosity. All electrical work should be performed by a person with qualifications. If you undertake this task yourself, remember that you do it at your own risk. I am not responsible for attempts to connect elements on your own without the appropriate qualifications. I invite you to watch, subscribe, like, comment, share and wait for the next productions, take care! :D @rozquadjazdy6925