795,802 views
I do it the way I want. I build it myself and for myself. I don’t teach anyone anything. I modify old rafters into the attic frame and insulate them. I fence off the attic in the existing roof. I don’t touch the rafters and slate. I only change the position of the rafter ties and make a frame of vertical walls. I also made an exhaust hood from the toilet on the first floor from sewer pipes. Insulation of the attic with EcoRoll roll insulation, with an additional layer of 20 mm Penoplex from the inside, but this is in the next episode. Support the channel - https://yoomoney.ru/to/4100117994057605 Initially, of course, no one planned that there would ever be an attic here. Therefore, perfectionists will be hurt to look at this. The size of the attic is 7.5x4 meters, the ceiling height at the ridge is 2.9 meters. (attic in a wooden house 6x8 m on the outside) Materials: frame board 50x150 (didn't disassemble the roof, didn't remove the slate, didn't touch the rafters, only touched the ties) insulation ecorol 150 mm + penoplex 20 mm from the inside. wind and vapor barrier spunline A, B sheathing OSB 3, 9 mm KALEVALA board. windows Rehau 40 mm double-glazed window 1650 x 1150 mm floor covering - laminate. and there is also a wooden staircase ... heating - 4 quartz heaters. 0.5 kW each. + stove on the first floor