Mistakes and tips when painting my house When you are not a professional, buying an Airless machine, when you can do it with a roller, is an important decision. Also, since you have never used it before, you don't really know how difficult it is to use it. In this video, I am going to tell you what it was like to use an Airless machine for the first time, the tips and mistakes I made and some technical details that you need to know, to help you make this very important decision. Amazon: https://amzn.to/3FR6hWD Leroy Merlín: https://tidd.ly/3wD5J4R If you are looking to solve a specific problem, here is a guide to the different parts of the video in case you want to go directly to that point: Timestamps: 00:00 Presentation 00:44 Introduction 01:16 Testing with water 02:38 Surface protection 03:50 Location of the machine 04:56 Machine pressure regulation 06:57 Problems with pressure regulation 10:04 Painting technique 11:26 Fixing excess airless paint 12:34 Trimming walls and ceilings with airless 14:46 Personal opinion advantages and disadvantages One of the tasks that I like least in an entire work is undoubtedly painting. The time has come to paint the new walls of my house. I give it a first coat with a roller to remove the imperfections in the wall and correct them with plaster. I paint again to finish it off, and some marks start to appear, which I don't understand why they appear, which ruin all the work done. You sand, you paint again, and after a lot of painting, in the end it doesn't end up with the finish you expected. I saw an offer in a DIY centre for this airless machine, the Wagner Control Pro 250 M, and I started to think that it could be a good solution to my painting problem. I started watching videos on YouTube, I realised that it wasn't difficult to use, so in the end I decided to buy it. At first you start out scared, but as soon as you gain a little confidence, you realise that it is very easy to use. Of course, at first you make a few beginner mistakes, which if they are not pointed out to you, you will not fall for them, so in the end I have decided to tell you about my experience and make my small contribution to this immense library of knowledge that is YouTube, to help people like me paint with an airless machine. If you are interested in buying this machine, this is the Amazon link where you can see its features. Also remember that if you enter from this link on Amazon and buy anything else, you will contribute, at no additional cost on your part, to me receiving a small commission for your purchase, which will help me grow the channel and thereby contribute to creating new videos like this one. Thank you very much in advance and see you at BricoAlter