77,369 views
The carburetor adjustment on the Ural 2 t Electron chainsaw is made with three screws, two of which are in the carburetor itself and the third screw is on the steering wheel and fixes the throttle control lever. But before I begin to explain the carburetor adjustment itself, I want to draw your attention to the following points: https://topmetod.net Support the channel on Patreon https://www.patreon.com/user?u=50433153 or on wallets Z308614543961; R287169464449 The carburetor adjustment is made, which is very important, only on a warmed-up engine and in a certain sequence. Due to lack of experience, there may be cases of complete misalignment of the carburetor, while the chainsaw stops working normally, and starting the engine becomes difficult or impossible. In such cases, to restore normal adjustment, it is necessary to set the carburetor screws to their original position as follows: a) screw 1 is screwed in until it stops and then unscrewed by one turn; b) screw 2 is screwed in until it stops and then unscrewed by '/2 turn. You will find more complete information on the website https://stroivagon.ru