247,504 views
The process of creating an Abyssinian well (well) by hydrodrilling with your own hands, without work experience. As drills I used a polypropylene pipe with a diameter of 20 mm, the cost of 1 meter is 32 rubles, which is one of the most affordable options for drilling pipes. I connected the pipes with inexpensive couplings that are soldered. As a filter I used a filter made of organza, the cost of 1.5 m2 was 200 rubles. Casing pipe - HDPE 32 mm, filter length - 1 meter. I made a well in the sand. In clay, I think the process would be more difficult and would require a more powerful pump. Up to 6 meters, I used a Leroy pump for 1 thousand rubles, then the pump could not cope, replaced it with another pump costing about 3 thousand rubles. You can borrow a drainage pump. The total cost of the well is about 1000 rubles.