I will show you what to do if you have problems with the water from the well. Maybe you don't realize that you can have problems with the water from the well until it's too late. You will find the answer to several questions, including: why does the water in the fountain smell like boiled eggs, why is there no pressure in the water from the water heater, why does the water heater or submersible pump run continuously. The good news is that I will show you the signs to look for and that warn you if you have problems with the water from the well or with the hydrophore. ???? Recommendations for you ???? 1️⃣ Submersible pump pressure switch ➡️ https://bit.ly/presostat-pompa-submer... Mechanical pressure switch ➡️ https://bit.ly/presostat-mecanic 2️⃣ Water filter with purge valve ➡️ https ://bit.ly/filtru-de-apa-robinet-... Polypropylene water cartridge ➡️ https://bit.ly/cartus-filtru-apa-poli... 3️⃣Test for water analysis ➡️ https://bit .ly/test-pentru-analiza-apei ⏰ Contents ⏰ 00:00 7 Problems With Well Water [Submersible ❌ And Water Pump] 00:44 What breaks down most often at the water pump? 01:31 The water pump blows air and the flow is low 02:19 The pump draws sand and sediments 03:15 Low pressure at the water pump 04:16 The electricity bill has increased a lot 05:04 The water pump takes out water with air or water comes in stitches 06: 06 The pressure switch and the water pump always start and stop 06:57 The water quality has changed a lot 07:42 Problems with water from the well 08:20 Conclusion ► Useful resources: ⚡️ [video] 5 Problems With the Water Pump [And Their Solutions] • 5 Problems With the Water Pump [And Resolver... ⚡️ [article] 7 Signs That You Have Problems With Well Water https://blogdeinstalatii.ro/7-semne-c... ⚡️ [video] Masking Ideas for the Central Station How do I mask the Thermal Power Plant? Masking Ideas For Central How do I mask the Thermal Power Plant? The rubber membrane of the vessel can sometimes break and must be replaced. The water heater or submersible pump must maintain a constant water pressure. To maintain the pressure, the water pump is turned on and off by a pressure switch. Due to humidity, the pressure switch can be damaged. If the water pump or submersible pump suddenly pulls sand, it is not a good sign. It may mean that the drilling is not done well, or that a lot of sand collects at the bottom. When the pump draws water, the water level in the fountain drops to a minimum level. If the pump is close to the bottom of the well, sand and other sediments can be sucked in at the same time as the water. Another reason for sand in the water may be that the filters that are placed at the bottom of the wells allow sediments and sand to pass. If water does not come from the fountain at all, there can be several causes that cause the low pressure at the hydrophore. These are: defective submersible pump, blocked check valve, partially closed or defective valves, expansion vessel with broken membrane or no air pressure. In some situations, there are iron-oxidizing bacteria that block the metal pipes and lead to the failure of the pressure switches that no longer feel the pressure well. Another symptom is that the hydrophore draws false air and defuses. It is more serious if the crack is on a part of the pipe that is buried in the ground, because it is more difficult to access. We can have the same symptoms if the water level in the well has dropped a lot. Or if the hydrophore shoots from a depth greater than 8 meters. This problem with the water from the well can be caused by a leak in the house that causes the well pump to run continuously. It can also be caused by cracks that appear from the freezing of the pipes or hydrophore. Another common cause is the sense valve or sip. The check valve maintains the water column and the water pressure in the expansion vessel. If the check valve breaks, the water flows back into the well, and the pressure switch always turns on the water pump. Replacing the direction valve usually solves the problem. Other changes in water quality such as water smelling like boiled eggs may indicate that the water is contaminated from sources such as septic tanks. For changes in water quality such as smell and color, do a water analysis once a year. To filter the water from the fountain, use a drinking water filter that you install after the hydrophore. What problems did you have with the water from the fountain? #hidrofor #submersibila #problemeapa #apa #BlogdeInstalatii ⚡️ Subscribe: / @blogdeinstalatii ⚡️ Join: / @blogdeinstalatii ⚡️ You can find me on Facebook: / blogdeinstalatiiro ⚡️ Read the blog: http://blogdeinstalatii.ro/ ➡️ Subscribe: https ://blogdeinstalatii.ro/abonare/