At a very low cost and with simple tools, you can double the lighting power of your car, or in simpler terms, you can restore the lost power of the original lighting power due to time factors on the car and the lighting system, and full details are in the video ---------------------- Useful links for you to join the channel and get special privileges from here / @sasamh --------------------- A cheap trick that doubles the life of your car battery Check it out from here • A cheap trick that doubles the life of the car battery and... ---------------------- To communicate regarding business, use the following email For business inquiries contact me at [email protected] Important note: I do not have a maintenance center and I do not repair cars for people ------ An Egyptian page that has cheap and useful products for cars / caregytech My second channel with quick maintenance videos / @mustafa-experiences On TikTok, you will find short videos of maintenance work in the car https://www.tiktok.com/@mustafa_sasam... We share on Instagram pictures and short videos of what happens behind the camera / mustafa_sasamh A site that provides products related to cars and technology at reasonable prices Discounted https://ban.ggood.vip/XsKP ------ Additional explanation: When disassembling the headlight, if you find that the internal reflector is made of plastic and not metal, there is no need to use sandpaper at all. It is sufficient to use thinner with a piece of cotton cloth, and it is sufficient to remove all traces of the old, worn reflector. Do not use unknown brands of nickel paint because they will not withstand the temperature inside the headlight and will quickly deform from the heat of the bulb. The method I explained in the video to adjust the level of the car lights is a guide for you.... meaning..... If you adjust it and when trying it, you find the light low down, go back to it and raise the light level in the headlights based on the same line so that there is a balance in the light.... And if you find the light high, go back to the same line and lower the light based on the same line and always make the headlight in front of the driver slightly lower than the other headlight. There is another alternative method for painting the internal reflector with nickel, which is by electroplating, but its problem is that it only works with a reflector made of metal, while a reflector made of plastic does not have The only solution is to paint. The only case in which you will need to go to a technician is to install an external relay or switch for lighting. After plating the nickel, you must wait at least two hours until it dries completely. The explanation is over. Don't forget that watching the ads on the video is support for me to continue. You can get benefits and support the channel by subscribing to it from here / @sasamh