237,358 views
Installing a car camera is usually quick and easy. However, it is worth spending a few extra minutes to do it correctly and not make mistakes that may pose a safety risk. #Installation will take a little longer, but the effect will be much better. ✅ Do not cover the airbags When running the cable to the A-pillar, it is worth tilting its cover and threading the power cable over the air curtain. A cable routed under the airbag may restrict it when opening or cause additional damage when the curtain pulls on the cable. ✅ Do not run the cables directly under the seals It is worth hiding the cable deeper than under the seal itself. If we do not do this, the extra millimeter of the seal thickness can cause wind blows at high speeds. ✅ Plug the #recorder into the fuses Most driving recorders have a 12V USB charger included in the set. However, it is worth considering connecting the recorder directly to the fuses in the cabin. Thanks to this, we will not only have a free cigarette lighter socket, but we can also choose a fuse that has voltage before the ignition is turned on. #The camera will then turn on before the key is turned. Instead of a USB charger, we use fuse taps and a step-down converter to 5V. ???? Mini size fuse tap: https://s.click.aliexpress.com/e/_dYk... ???? 5V USB step-down converter: https://s.click.aliexpress.com/e/_d84... ???? 70mai Pro recorder: https://s.click.aliexpress.com/e/_d7z... 0:00 3 tips for mounting the camera 0:46 Do not cover the air curtain 2:36 Do not distort the door seal 3:13 Plug the recorder into the fuses 4:04 Fuse-tap ???? mr-fix: / mrfixpl ???? facebook: / lonacznik