47,308 views
The resistor for the emulator must be taken with a nominal value of exactly 1 kOhm, the power does not matter. If you take a higher resistance, the consumption will be higher. If you take a resistance of less than 1 kOhm, the ECU will throw errors on the coolant temperature sensor and fall into emergency mode. Relay - any automotive 5- or 4-pin with normally open contacts. Series on the theory of operation and repair of DTVV • 7. Single injection. DTVV - temperature sensor ... Series on the incoming air heating system • 8. Single injection. Thermostat dampers... Useful information: Playlist dedicated to the theory of operation, repair, and adjustment of single injection: • All about Single injection, adjustment and repair Also in our store you can order a contactless TPS for single injection http://shop.pilotpowersupply.com/prod... Instagram / pilot.engineering VK https://vk.com/pilotengineering Drive2 https://www.drive2.ru/r/audi/80/52357...